It can be used for quite resistant parts, transmissions, engine cylinders as well as machinery elements.55% carbon percentage, 70-75 kg / mm2 strength and 200-220 HB hardness. There other elements which are necessary for their production in the alloy, such as silicon and manganese. Mostly it is used for cutting tools; knives, knives, saw blades, cement bits, pipe cutters, etc. This type of carbon steel from Alloy components of electric circuit Company steel pipe fittings manufacturers in India is used in the elaboration of bolts, screws, resistant parts, machinery elements and more frequently used.3% carbon.5% carbon. Because of these properties it uses in regularly loaded parts, of not very high thicknesses, in transmissions, axles, pensioners, among others. Based on the amount of carbon they contain, it can be divided into the following categories:Mild steel: It has a carbon percentage of 0. This allows the steel to withstand much more extreme temperatures allowing heat treatments to be applied effectively.High carbon steel: The latter contains more than 0.
It may seem very little difference but even the slightest variation can completely change the behaviour of the material.3 and 0. They can be heat treated by tempering and tempering to improve mechanical properties. The increase in carbon content in steel increases its tensile strength, increases the rate of cold brittleness and reduces toughness and ductility. In addition it should be noted that the carbon content raises the strength of the steel and increases the rate of brittleness to the cold, reducing the toughness and ductility. These steels are also known as construction steels.Semi-hard steel: Its properties give it a good resistance; however it can be subjected to certain types of deformation.45%, resistance of 62-70 kg / mm2 and hardness of 280 HB.Carbon Steel and its characteristicPosted by redearthsteel on December 18th, 2019Carbon steel is the main product of the steels that are produced; estimating that 90% of the total production produced to carbon steels and the remaining 10% are alloy steels.Low carbon steel: It contains less than 0. The chemical composition of carbon steels is complex, in addition to iron and carbon that generally does not exceed 1%.
Depending on the carbon content of steel, it is classified into three types.. Its applications are in materials with cold deformation, elements of machinery of great tenacity, fittings, folded, among others. It is a very little ductile material. Thanks to these properties it is widely used in the construction sector.15%, mechanical resistance of 38-48 kg / mm2 and a hardness of 110-135 HB, which makes it easy to handle, weld and deform. It is also more prone to corrosion and less expensive than other materials used for cutting.Characteristics of carbon steelCarbon steel from stainless steel pipe fittings manufacturers in Indiahas special characteristics that make it a material of great strength and hardness. The applications of this category are pieces of medium strength, drawing, folding, and hardware, among others which can be buy from Alloy Steel Flanges Manufacturers in India. It contains a percentage of 0.Medium carbon steel: Contains between 0.Hard steel: Its properties are 0.35%, mechanical resistance of 55-62 kg / mm2 and a hardness of 150-170 HB.5% carbon in its composition. These are relatively soft and not very resistant, but very ductile and malleable.Semi-mild steel: With a carbon percentage it is 0